Warning Indications Used In This Document; For Safe Use - Fujitsu ScanSnap S1100 Getting Started Manual

Warning Indications Used in This Document

The following indications are used in this document to obviate any chance of
accident or damage to you and/or the ScanSnap.
Warning
Indication
This indication alerts operators to an operation that, if not strictly
ARNI N G
observed, may result in severe injury or death.
This indication alerts operators to an operation that, if not strictly
AUTION
observed, may result in safety hazards to personnel or damage to the
product.
A TRIANGLE symbol indicates that special care and attention is
required. The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows actions which users
should not perform. It may also have a drawing inside which shows
the specific action that is not allowed.
A white exclamation mark on black background show instructions
users should follow. It may also include the drawing that shows the
specific instruction.

For Safe Use

The following describes important warnings for using the ScanSnap.
For the safe use of the ScanSnap, make sure to follow the following descriptions.
ARNI N G
In one of the following situations, immediately turn off the ScanSnap, and
disconnect the USB cable from the ScanSnap and computer. Not doing so
may cause a fire or electric shock.
The ScanSnap is damaged for any reason.
Smoke or heat coming from the ScanSnap is detected.
Strange noise or smell is detected.
Foreign objects (water, liquids, small metal objects, etc.) get inside the
ScanSnap.
Other problems which indicate a ScanSnap failure are detected.
Then, contact your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider. Never try fixing such problems by yourself. Doing
so is dangerous.
Do not take apart or modify the ScanSnap.
PFU assumes no liability to any damage caused by taking apart the
ScanSnap, as doing so is not covered under the warranty.
Description
10