System Requirements - Fujitsu ScanSnap S1100 Getting Started Manual

®
Windows Installation
■ Software
You can install the following software:
ScanSnap Manager (Scanner driver)
ScanSnap Organizer (File management application)
CardMinder (Business card management application)
ABBYY FineReader for ScanSnap (OCR application)
To use Evernote for Windows and/or Scan to SharePoint, the required software
should also be installed.
For details about each software and its installation procedures, refer to "Installing
the Software" in the Operator's Guide.

■ System Requirements

Operating
system
CPU
Memory
Display resolution 800 × 600 pixels or higher
Hard disk space
(*3)
USB port (*4)
*1: Service Pack 1 or later is required
*2: Service Pack 3 or later is required
*3: If .NET Framework 3.5 SP1 is not installed, maximum of 500 MB of additional
free hard disk space is required for it.
*4: When using USB 3.0 port, it works as USB 2.0.
If the CPU or the memory do not meet the required specifications, or the
type of USB port or USB hub is USB 1.1, the scanning speed will slow
down.
When the font size is large, some screens may not be displayed properly.
In that case, use a smaller font size.
The actual increase in used disk space after installation and the required
disk space for installation may differ from each other depending on your
®
Windows
®
Windows 7
(32-bit/64-bit)
®
Intel Core™ 2 Duo 2.2 GHz or higher recommended
®
(Minimum: Intel Pentium
32-bit: 1 GB or more
64-bit: 2 GB or more
1940 MB or more of free hard disk space
(2390 MB or more of free hard disk space is required for using
with Rack2-Filer)
USB 2.0 / USB 1.1
system disk management.
®
Windows Vista
(32-bit/64-bit) (*1)
®
4 1.8 GHz)
512 MB or more (1 GB or more
recommended)
3
®
Windows XP
(32-bit) (*2)