Fujitsu ScanSnap S1100 Getting Started Manual page 11

Firmly insert the USB cable into the ScanSnap and computer. Not doing so
may cause a fire or the ScanSnap to malfunction.
Use only the USB cable provided with the ScanSnap. Not doing so may
cause abnormal heat or a fire. Do not use the USB cable provided with the
ScanSnap for other devices, since this may cause problems such as an
equipment failure, or an electric shock.
Do not install the ScanSnap in the following locations which are subject to
high temperature, humidity, less ventilation, or dust. If placed in an area
subject to high temperature, the cover may become overheated and
deformed, resulting in an electric leakage or fire.
Use the ScanSnap in a well-ventilated environment.
A place near heat-radiating devices such as stoves or electric heaters, or
flammable items such as volatile inflammable materials or curtain.
A place such as kitchen where oil smoke may be formed.
A place such as a bathroom, shower room, or swimming pool where it
may easily get wet.
A place under direct sunlight, in a car under the scorching sun, or near
heating apparatus where it may get hot.
To avoid injuries, do not place the ScanSnap in an area where small
children may be able to reach. Keep the plastic bag, stickers, and plastic
ties from the packaging out of the reach of small children, as inappropriate
use may cause injury or suffocation.
Do not leave the ScanSnap on the floor. It may be stepped or stumbled on,
resulting in damage or injuries.
Before moving the ScanSnap, be sure to disconnect the USB cable that
connects the ScanSnap and computer.
Make sure that the floor is free of any obstructions.
Moving the ScanSnap with the cable connected to the computer may
damage the cable, in turn causing fire, electric shock or injuries.
Do not touch the USB cable with wet hands. Doing so may cause an
electric shock.
When disconnecting the USB cable from the ScanSnap and computer,
make sure to hold the USB plug and not the cable. Pulling the cable may
damage it, which may cause a fire or electric shock.
Do not use the USB cable if it is damaged. Also, do not insert the USB
cable into a loose USB port socket on the computer. Doing so may cause a
fire or electric shock.
Be careful of the following when handling the USB cable:
Do not moisten, modify, tie, bundle, or wind the cable.
Do not place heavy objects on the cable, or trap the cable in a doorway.
Do not pull or forcibly bend or twist the cable.
If the USB cable is damaged, contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
11