Accessories - Friedrich PTAC Installation & Operation Manual

Friedrich PTAC Accessories
NEW CONSTRUCTION AC CES SO RIES
MODEL NUMBER
WALL SLEEVE zinc coated steel is prepared in an eleven-step
process, then powder coated with a polyester fi nish and cured
PDXWS in an oven for exceptional durability. The wall sleeve is insulated
for sound absorption and thermal effi ciency.
16" High x 42" Wide x 13¾" Deep.
GRILLE standard, stamped aluminium, anodized to resist
PXGA
chalking and oxidation.
ARCHITECTURAL GRILLES Consist of heavy-gauge
PXAA
6063-T5 aluminum alloy:
PXDB
PXAA– Clear, extruded aluminum
PXDB– Dark bronze acrylic enamel
PXSC
PXSC– Also available in custom colors.
CONDENSATE DRAIN KIT Attaches to the bottom of the wall
sleeve for internal draining of condensate or to the rear wall sleeve
PXDR10
fl ange for external draining. Recommended on all units to remove
excess condensate. Packaged in quantities of ten.
DEEP WALL SLEEVE EXTENSION A four inch deep anodized
aluminium extension that attaches to the outside of the wall sleeve
PXWE
when the wall is greater than eleven inches thick (9½" when a
subbase is used, 10 inches when a lateral duct is used).
DECORATIVE SUBBASE Provides unit support for walls less
than six inches thick. Includes leveling legs, side fi ller panels
PXSB
and mounting brackets for electrical accessories. Accepts
circuit breaker, power disconnect switch, or conduit kit.
DIGITAL REMOTE THERMOSTAT Digital elec tron ic
RT2 thermostat with "one touch" adjustment. Mounts to wall for
control of unit.
PDXRT – REMOTE THERMOSTAT ESCUTCHEON KIT
This kit contains 10 escutcheons that can be placed over
the factory control buttons when a remote wall mounted
PDXRT
thermostat is used. The escutcheon directs the guest to the
wall thermostat for operation and retains the LED window to
display error codes and diagnostic information.
920-087-04 (8-05)
DESCRIPTION PHOTO
PDXWS
PXDB
PXDR10
PXWE
PXSB
MODE FAN
RT2
PDXRT
25