Performing A Robotic Self-Test; Cleaning The Ink Cartridges - Primera Disk Publisher SE User Manual

To ensure that everything is working properly, a Self-Test
feature is built in to your Publisher. In this mode, the Robotic
Disc Transporter will go through the motions of picking and
placing a disc to ensure proper working order. This test may be
performed without connecting the Publisher to the PC.
Perform the test by doing the following steps:
〈
Load some discs into the Input Bin.
〈
Open the cover.
〈
Press and hold the power button for five seconds. The test
will start.
〈
To stop the test, close the cover and press the power
button.
It may be necessary to clean the ink cartridge nozzles if you
notice reduced print quality, or if you suspect an cartridge noz-
zle has become slightly dried out or clogged. If you are having
print quality problems, follow the steps below:
1. Remove the print cartridge.
2. Moisten a lint-free cloth with water.
3. Hold the cloth against the
nozzles for three seconds.
This will "wick" some
additional ink onto the damp
cloth.
4. Wipe in the direction shown.
5. Repeat the process.
Maintenance and Troubleshooting
45