Primera Disk Publisher SE User Manual page 46

The Image Alignment button will allow you to nudge the
image up, down, left, or right on your disc. To center the
image, click the Image Alignment button. You will be
prompted with a choice to print a test print or simply enter val-
ues to nudge the image alignment on the disc.
If you do not know the direction and distance to move the
image in order to center it on your disc, you can opt to print
the centering test print. Make sure the Publisher has discs and
an ink cartridge installed, and it is connected and ready to
receive a print job, and then click the Yes button. The
Publisher will pick a disc and print a scale of numbers on it.
You will be prompted to open the Publisher's front cover, rotate
the printed disc 180 degrees, reload it into the
input, and close the cover. Click OK when ready
and the Publisher will pick the disc and print
another scale of numbers. The disc should look
like this:
Creating Discs on a Mac
42
5
5
BACK
4
4
3
3
2
2
1
1
NOTE: 0
0
After printing this image -1
-1
once, rotate this CD
-2 -2
-3
so the ARROWS point
-3
-4
to the BACK of the printer
-4
-5
and print again.
-5
BACK
number) SAME the be (must
tough lines whose
number the enter and Find
Calibration Vertical
5 4 3 2 1 0 -1 -2 -3 -4
5 4 3 2 1 0 -1 -2 -3 4 -5
number) SAME the be (must
tough lines whose
number the enter and Find
Calibration Horizontal
-5