Primera Disc Publisher SE Quick Start Manual

6 Installing the Ink Cartridge
• With the cover open, press the button on the
top of the Publisher to move the Ink
Cartridge Carrier to the load position.
• Open the cartridge cover by pressing down
on the tab.
• Remove the ink cartridge from its
packaging.
• Slowly remove the tape cov-
ering the cartridge's print
head.
DO NOT TOUCH THE
COPPER AREA!
7 Aligning the Cartridge
If you are using a PC the Installer will prompt you to align the cartridge.
If you are using a Mac
you will be prompted to align the cartridge before you print for the first time.
Note: An alignment print is required every time you install a new cartridge. The software will always prompt you to
align the cartridges. Make sure there is an unprinted disc in the bin for this alignment.
8

Publishing a Disc

Congratulations, you are now ready to start printing and burning discs!
For instructions on printing or publishing a disc see Section 3 of the User's Manual.
For help with problems publishing discs using a PC or Macintosh please visit Primera's online
Knowledgebase at www.primera.com/knowledgebase.html.
• Insert the ink cartridge into the carrier,
copper end first and snap the cartridge
cover in place.
• Close the Publisher's front cover.
510964
P/N - 102909
Automated Optical Disc
Duplication & Printing System
For Macintosh and PC
© 2015 All rights reserved.