Primera Disk Publisher SE User Manual page 31

5. Along the Vertical axis of the printed disc, find the number
whose lines touch. For example, in the above illustration,
Enter the number 2 into the Vertical box of the Calibration
window and 0 for the Horizontal axis.
6. Select the OK button. Your images should now be centered
when printed on a disc.
After your selections have been made, close out of the
printer setup window. You are now ready to go to an
application program and print. All printer driver selections
will stay the same until you change them.
Select this button to display the current ink levels as well as
options for cleaning and changing cartridge.
Select the Change Cartridge button to install a new ink
cartridge or to switch back and forth between previously used
cartridges.
Select Clean/Purge button to send a simple test pattern to the
printer. Be sure to have a disc in the Publisher's input bin and
the front cover closed. The test pattern purges ink through noz-
zles of your ink cartridge to clear any blockages.
Creating Discs on a PC
27