Pressure Systems 9046 User Manual page 44

Pressure Systems, Inc.
7 single binary float
8 single binary float
Example :
Command module to return decimal raw "Temperature/Resistance" A/D counts data for Primary
Transducer channels 1, 5, 9, and 13:
" a11110 "
Response contains data for channels 13, 9, 5, and 1 (left to right):
" 32767.000000 -32700.000000 10.000000 16385.000000 "
Please note that channel 13 is saturated at +full scale and channel 9 is almost saturated at -full
scale. Channel 5 reads near zero and channel 1 is about 1/2 +full-scale.
Note
Page 38
to single binary float (big endian: msb first)
to single binary float (little endian: lsb first)
NUSS does not use this command normally. You may execute it
manually via the 'Execute Commands' or 'Execute Script' functions
of NUSS - though this should be avoided if NUSS is currently
operating the module via other NUSS functions. NUSS normally
reads all the data it needs from a module by configuring
autonomous streams (see the 'c' command).
Model 9046 User's Manual
4
4
www.PressureSystems.com