Sub-Command Index 03: Clear Stream(S) - Pressure Systems 9046 User Manual

Pressure Systems, Inc.
5.7.4 Command 'c'- Sub-command Index 03: Clear Stream(s)
This sub-command is used to "undefine" any previously configured host stream in a module,
one at a time, or all together. The sub-command's format is:
"c 03 st"
Command
'c' is the operation code
'03' is the sub-command index ('ii') for
configuration
'st' is the stream identifier character (1, 2, or 3 or
0=all streams)
NOTE: all parameters are separated by a space
character.
"A" or "Nxx"
Response
'A' for acknowledge; 'N' for negative acknowledge,
error code xx.
none generated
Autonomous
Packet
Description : This sub-command clears (un-defines) the particular specified host stream ( st =1-
3), or un-defines "all configured" host streams with a single command ( st =0). Once cleared, a
stream must be reconfigured before it can be started.
Example :
Stop all the streams configured previously. Then clear (un-define) only stream 3. Finally,
resume the remaining defined streams 1 and 2:
" c 02 0 "
" c 03 3 "
" c 01 0 "
Read response:
" A "
" A "
" A "
Page 53
Model 9046 User's Manual
www.PressureSystems.com