Computer Preparation - Pressure Systems 9046 User Manual

Pressure Systems, Inc.

2.2 Computer Preparation

The PC must have its IP address and subnet mask set to be compatible with the addressing
existing in the module. For a new module this will be the factory default. The IP address of the
host PC must be set to: 200.200.1.1.
Follow this procedure to set the IP address and subnet mask.
1. Click on the Network Neighborhood icon and then right-click to reveal a drop menu. Select
Properties. The screen that follows should appear.
Figure 2-1: Network Dialog Box
2. Using the scroll bar, scroll down to the TCP/IP entry for the Ethernet interface in use by
the PC. Select this item and then click the Properties box. The screen that follows should
appear.
Page 6
Model 9046 User's Manual
www.PressureSystems.com