Sub-Command Index 04: Return Stream Information - Pressure Systems 9046 User Manual

Pressure Systems, Inc.
5.7.5 Command 'c' - Sub-command Index 04: Return Stream Information
This sub-command returns current stream configuration information in its response. Its format
is:
Command "c 04 st"
'c' is the operation code
'04' is the sub-command index (' ii ') for configuration
' st ' is the stream identifier character (1, 2, or 3 only )
NOTE: all parameters are separated by a space
character .
Response "st pppp sync per f num pro remport ipaddr bbbb "
'st' is the stream identifier digit (1,2, or 3)
' pppp ' is a hex position field (channel selection bit
map)
' sync ' is sync type character (0 or 1)
' per ' is the period (# trigger periods or delay timer
period)
' f ' is the format of the data delivered in stream
' num ' is the number of scans delivered in the
stream
' pro' identifies the protocol used for stream delivery
(1=UDP/IP, 0=TCP/IP. This protocol identifier
pertains to stream delivery only .
'remport' identifies the remote port number to which
each stream delivery is directed in the host. A value
of -1 indicates that stream delivery is directed to the
same port number the host is using to send
commands to the module.
'ipaddr' identifies the IP address of the host to which
the stream delivery is directed.
'bbbb' another position field (data group options bit
map) as specified by the " 05 " sub-command.
NOTE: All datum fields separated by a space
character.
Autonomous none generated
Packet
Page 55
Model 9046 User's Manual
www.PressureSystems.com