Table of Contents
Advertisement
of store stamp. When the printing ink of the stamp is not enough, you
can drip printing ink into the two holes in the rear of the stamp case.
RIBBON
D.
Handle of
the ribbon
When replacing the ribbon, please take the handle at the center of
the old ribbon case and lift it up. Then the old ribbon can be taken out.
When installing a new ribbon, please place the new ribbon to a
suitable position and align the axle hole under the ribbon case to the
driving axletree of the printer. Then push down the ribbon case. Now
PP2000 (E) User's Manual
INSTALLATION / REPLACEMENT
Location of
the ribbon
Knob
of
the ribbon
3 - 3
Advertisement
Table of Contents
