System Control Limit Values Work Sheet; System Timer Values - Emerson Vission Control Manual

The values or options in the screen displays shown must be entered before start-up.
SYSTEM CONTROL LIMIT VALUES WORKSHEET
TIMER VALUES
AT START CAPACITY DECREASE
CAPACITY INCREASE MOTOR ON
CAPACITY DECREASE MOTOR ON
CMP STARTER AUX CONTACT BYPASS
CAP INCREASE MOTOR OFF
CAP DECREASE MOTOR OFF
VOL SLIDE ADJ TIMER
MINIMUM CAP PRELUB TIME
RUN CYCLE OIL PRESS BYPASS
PRELUB PUMP TIME LIMIT
FLTR DIFF PR SAFETY CHANGEOVER
LO OIL SEP LEVEL BYPASS TIMER
AUTO RESTART AFTER POWER FAIL
OIL SEP TEMP SAFETY CHANGEOVER
LO OIL INJ TEMP SFTY CHANGEOVER
ANTIRECYCLE STRT TIMER (MIN)
FORCE START LAG COMP (MIN)
HOT STRTS/HR COUNTER (COUNTS)
NOTES:
(1) Must be field set.
(2) Set only if Lead/Lag option is selected.
82

System Timer Values

SYSTEM VALUES
(1)
(2)
(1)
VALUE LIMITS DEFAULT VALUES
0/999 SEC 15 SEC
0/255 SEC 2 SEC
0/255 SEC 2 SEC
0/255 SEC 10 SEC
0/255 SEC 20 SEC
0/255 SEC 10 SEC
0/255 SEC 20 SEC
0/255 SEC 5 SEC
0/90 SEC 60 SEC
0/255 SEC 255 SEC
0/999 SEC 60 SEC
0/120 SEC 60 SEC
1/240 MIN 5 MIN
0/15 MIN 5 MIN
0/15 MIN 6 MIN
0/30 MIN 20 MIN
0/60 MIN 30 MIN
1/10 COUNTS 3 COUNTS