Euphonix MC Control Artist Series Setup Manual page 23

Artist Series
professional control surfaces
6. Repeat steps 3 and 5 for each additional Artist Series control surface in your
network.
The MIDI ports selected here should match those specified in the Euphonix
Preferences Pane.
7. Close the Preferences dialog.
Your Artist Series device should now be controlling your application. If not:
• Make sure Live is the front-most application (i.e., the one receiving key-
strokes and mouse clicks). The Artist Series devices control only the front-
most application.
• Check that all steps in Setting Up EuCon for Mackie Control on page 15 and
in this section have been performed correctly, and reboot your Mac.
• Make sure the Euphonix MIDI device in Applications->Utilities->Audio MIDI
Setup is blue (active) and not gray (inactive). If inactive, select it, click Re-
move Device, and click Rescan MIDI.
Artist Series
23