Digital Performer - Euphonix MC Control Artist Series Setup Manual

5.3

Digital Performer

Before proceeding, you must already have completed the steps described in
Setting Up EuCon for Mackie Control on page 15.
To finish the configuration:
1. Open Applications->Utilities->Audio MIDI Setup and select the MIDI Devices
20
2. Click Add Device, double-click the device that appears in the Audio MIDI Set-
3. Repeat the previous steps for each additional Artist Series control surface
4. In Digital Performer select Setup->Control Surface Setup.
5. Configure the dialog settings as they appear in Figure 5-7.
tab (Figure 5-6).
Figure 5-6 Audio MIDI Setup
up dialog, and assign a device name (i.e., MCU1).
There is no need to modify the manufacturer, model or any other fields.
in your network.
Artist Series
professional control surfaces
Artist Series