Tuner Settings - Pioneer DVR-920H Operating Instructions Manual

The Initial Setup menu
Remote Control Mode
• Default setting: Recorder1
You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.
Initial Setup
Basic Clock Setting
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Mode
Recording AV Link
Playback Setup Navigator
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
There are three different recorder IDs. When set to
Recorder2 or Recorder3, the remote control mode is
shown in the front panel display.
After selecting a new recorder ID, you have to confirm the
change by selecting Yes or No (use the
left/right) buttons), then pressing ENTER.
Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the remote
to the same ID.
To set the remote, press and hold RETURN and a number
button (1, 2 or 3) until the indicator on the remote lights.
AV Link
• Default setting: This Recorder Only
Initial Setup
Basic Clock Setting
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Mode
Recording AV Link
Playback Setup Navigator
This setting determines how AV Link signals are handled
when the recorder is in standby. Choose the This
Recorder Only setting for AV Link signals to affect only
this recorder. Choose Pass Through to have this
recorder pass on AV Link signals to other connected
devices without affecting this recorder.
Recorder1
Recorder2
Recorder3
(cursor
This Recorder Only
Pass Through
Setup Navigator
• Default setting: n/a
Initial Setup
Basic Clock Setting
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Mode
Recording AV Link
Playback Setup Navigator
The Setup Navigator appears automatically when you
switch on the recorder for the first time (or after resetting
the recorder). It is also available from the Initial Settings
menu should you need it at any other time.
See also Switching on and setting up on page 26.

Tuner settings

Auto Channel Setting : Auto Scan
This recorder has a built-in TV tuner for recording PAL B/
G, PAL I, SECAM L and SECAM D/K TV programs off the
air or from analog cable TV. We recommend that you first
use the Auto Channel Setting described here to tune into
the channels in your area, then if there are any unwanted
channels, you can disable them using Channel Skip
(described below). You can also fine-tune individual
stations using the Manual CH Setting feature. See
Manual CH Setting below for how to use this.
1 Choose 'Tuner' from the Initial Setup menu, then
'Auto Channel Setting', then 'Auto Scan'.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video In/Out Channel Swapping
Audio In
Audio Out
Language
Recording
Playback
2 Select your country then press ENTER to start
tuning.
Initial Setup
Auto Channel Setting
Basic Auto Channel Setting Auto Channel Setting
Tuner Manual CH Setting
Country
Video In/Out Channel Swapping
Audio In
Audio Out
Language
Recording
Playback
• You can cancel before auto tuning has finished by
pressing ENTER again.
Start
Auto Scan
Download from TV
UK
14
109
En