Tuner Settings - Pioneer DVR-310 Operating Instructions Manual

The Initial Setup menu
Remote Control Set
• Default setting: Recorder1
You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.
Initial Setup
Basic Clock Setting
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Set
Recording Setup Navigator
Playback
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
There are three different recorder IDs. When set to
Recorder2 or Recorder3, the remote control mode is
shown in the front panel display.
Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the remote
to the same ID.
To set the remote, press and hold RETURN and a number
button (1, 2 or 3) until the indicator on the remote lights.
Setup Navigator
• Default setting: n/a
Initial Setup
Basic Clock Setting
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Set
Recording Setup Navigator
Playback
The Setup Navigator appears automatically when you
switch on the recorder for the first time (or after resetting
the recorder). It is also available from the Initial Settings
menu should you need it at any other time.
See also Switching on and setting up on page 23.

Tuner settings

Auto Channel Setting : Auto Scan
This recorder has a built-in TV tuner for recording TV
programs off the air or from analog cable TV. We
recommend that you first use the Auto Channel Setting
described here to tune into the channels in your area,
then if there are any unwanted channels, you can disable
them using Channel Skip (described below).
Recorder1
Recorder2
Recorder3
Start
1 Choose 'Tuner' from the Initial Setup menu, then
'Auto Channel Setting', then 'Next Screen'.
Initial Setup
Basic Auto Channel Setting
Tuner Manual CH Setting
Video In/Out Channel Swapping
Audio In VCR Plus+ CH Setting
Audio Out
Language
Recording
Playback
2 Select your country then press ENTER to start
tuning.
Initial Setup
Auto Channel Setting
Basic Auto Channel Setting Auto Channel Setting
Tuner Manual CH Setting
Country
Video In/Out Channel Swapping
Audio In VCR Plus+ CH Setting
Audio Out
Language
Recording
Playback
• You can cancel before auto tuning has finished by
pressing ENTER again.
After auto scanning has finished, the channel mapping
screen appears showing which channels have been
assigned to which program numbers.
Initial Setup
Channel Mapping
Pr System CH Name
1 M/N 26
2 M/N 33
3 M/N 23
4 M/N 30
5 M/N 37
6 M/N 35
7 M/N 39
8 M/N 26
Use the PREV/NEXT buttons to display the previous/next
page.
3 Press HOME MENU to exit this screen.
Note
• You can fine-tune individual stations using the
Manual CH Setting feature. See Manual CH Setting
below for how to use this.
Manual CH Setting
The channel skip function lets you skip channels where
there is no station so that as you change channels using
the CHANNEL +/– buttons, number buttons or the front
panel SMART JOG, you only change to channels that
have a station.
The manual tuning function allows you to manually tune
to stations, should you need to.
Next Screen
Mexico
1/7
Pr System CH Name
9 M/N 9
10 M/N 25
11 M/N 11
12 M/N 12
13 M/N 13
14 M/N 14
15 M/N 15
16 M/N 16
12
75
En