Recording From The Dv Output; Playing Your Recordings On Other Dvd Players - Pioneer DVR-920H Operating Instructions Manual

Recording
• Depending on your camcorder, you can use this
recorder's remote to control the camcorder using the
, , , , ,
7 Use the (cursor up/down) buttons to select
'Start Rec' and press ENTER.
Stop
1.02.22
Control with these
buttons
• Recording is automatically paused if the recorder
detects no signal, or a copy-protected signal.
Recording restarts when there is a non-copy-
protected signal.
• You can pause or stop the recording by selecting
Pause Rec or Stop Rec from the on-screen display.
You cannot control the camcorder from this remote
control during recording.
• If you restart recording after stopping the camcorder,
the first few seconds of the camcorder tape will not
be recorded. Use the pause button on your
camcorder instead and recording will start
immediately.
• HDD and DVD-RW (VR Mode) only: A chapter marker
is inserted every time there is a break in the timecode
on the DV tape. This happens when the recording is
stopped or paused then restarted, for example.
• While recording, you cannot exit the DV recording
screen using the HOME MENU or RETURN button.
• See also DV-related messages on page 129 if you
encounter an error while using the DV IN/OUT jack.
Frequently Asked Questions
• I can't get my DV camcorder to work with the recorder!
Check that the DV cable is properly connected. Also
make sure that what you're trying to record is not
copy-protected.
If it still doesn't work, try switching off the camcorder
then switch back on.
• There's a picture, but no sound!
Try switching the DV Input setting (see DV Input on
page 114) between Stereo 1 and Stereo 2.
and buttons.
Stop
Start Rec
Pause Rec
Stop Rec
HDD SP (2h00m/DVD)
Remain 1h40m

Recording from the DV output

VR mode Video mode HDD
You can record non-copy-protected material from the
hard disk drive or from a DVD to a camcorder connected
to the DV IN/OUT jack.
1 Connect the camcorder to the DV IN/OUT jack of
this recorder.
2 Select the HDD or DVD for playback.
3 Find the place you want to start recording from.
4 Start recording on the camcorder.
5 Play the source material.
Playing your recordings on other DVD
players
VR mode Video mode
Most regular DVD players can play finalized discs
recorded in Video mode. A number of players (including
many Pioneer models) can also play DVD-RW discs
recorded in VR mode, finalized or not. Check the manual
that came with the player to check what kinds of discs it
will play.
When you finalize a Video mode disc, a title menu is
created from which you can select titles when you play
the disc. There are a number of different styles of title
menu to choose from to suit the content of the disc.
All the title menus are navigated in the usual way,
pressing MENU or TOP MENU to display the menu, then
using the (cursor buttons) followed by
ENTER to select titles and start playback.
Finalizing a disc
VR mode Video mode
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Note that the disc name will appear in the title menu after
you finalize a disc. Make sure the disc name is as you
want it before you finalize the disc as it can't be changed
afterwards. If you want to rename the disc, see Input Disc
Name on page 102 before starting the steps below.
07
69
En