Controls And Displays; Front Panel - Pioneer DVR-920H Operating Instructions Manual

03

Controls and displays

Chapter 3
Controls and displays

Front panel

1 2
HDD DVD
STANDBY / ON
12
Controls hidden behind the front panel door
STANDBY / ON
S-VIDEO
1 HDD
Press to switch to the hard disk drive (HDD) for recording
and playback. The button lights when HDD is selected.
2 DVD
Press to switch to DVD for recording and playback. The
button lights when DVD is selected.
3 STB CONTROL indicator
Lights when this recorder is controlling an external
receiver via the G-LINK cable during timer recording.
4 HDMI indicator
Lights when this recorder is connected to another HDMI/
DVI (HDCP) compatible component.
5 Disc tray
6 OPEN/CLOSE
Press to open/close the disc tray.
7
Press to stop playback.
8
Press to start or restart playback.
9 STOP REC
Press to stop recording.
22
En
3 4
STB CONTROL HDMI
VIDEO AUDIO DV
L(MONO) R IN / OUT
INPUT 2
18 19
5 6
OPEN/CLOSE
13 14
20
10 ONE TOUCH COPY (page 72)
Press to start One Touch Copy of the currently playing
title to DVD or the HDD.
11 +/– (page 33, 35, 63)
Use to change TV channels, skip chapters/tracks, etc.
12 STANDBY/ON
Press to switch the recorder on/into standby. The upper-
half of the button is backlit blue when the recorder is on.
13 Front panel display
See Display on page 23 for details.
14 IR remote sensor (page 8)
15 REC
Press to start recording. The upper-half of the button is
backlit red when recording; the lower-half is backlit
orange (blinking) when real-time copying.
16 DISC NAVIGATOR (page 51, 86)
Press to display the Disc Navigator screen.
17 INPUT SELECT (page 67)
Press to change the input to use for recording.
7 8 9 10 11
DVR-920H
DVD RECORDER
ONE TOUCH
STOP REC
COPY
REC PULL
OPEN
15
16 17
DISC INPUT
NAVIGATOR SELECT REC
ENTER
RETURN REC MODE
21 22