57.Attach theSeat(16)totheSeatFrame (8)withtwo
M6x 16mm Screws (114), a n M6x 65mmScrew
(99), a ndanM6Washer (97).
58. Attach the Butterfly B ackrest (15)tothe Butterfly
Upright ( 3)withfourM6x 16mm Screws (114).
59.WetoneendoftheSquat A rm(32)andinside ofa
ShortPad(20)withsoapy water. S lide thePad(20)
ontotheSquat A rmas shown.
Attach theSquat H andle (33)totheSquat A rm(32)
withtwoM8x 20mm Button Head Screws (51).
Slidea 50mmOuter C apw/Hole (111) o ntothe
Squat H andle andpressitontotheendofthe
Squat A rm.Slide theShort P ad(20)overthe
Screws.
WettheSquat H andle withsoapy water. S lidean
200mm Handgrip ( 84)ontotheSquat H andle.
Repeat this step with the other end of the Squat
Arm (32).
60. Attach the Squat Arm (32) to the Squat Bracket (37)
with two M10 x 65mm Carriage Bolts (110) and two
M10 Nylon Locknuts (87). Do not tighten the
Nylon Locknuts yet.
Finish attaching the Squat Arm (32) to the Squat
Bracket (37) with two M10 x 70mm Carriage Bolts
(108), two M10 Washers (91), and two M10 Nylon
Locknuts (87).
Tighten all of the M10 Nylon Locknuts (87) used
in this step.
57
58
59
=
15_-
,114
6O
,_;- "_
111
84
32
110
20