Table of Contents
Advertisement
ASSEMBLY
Make Things Easier for Yourself
This manual is designed tqensure that the
exercise rack canbe assembled successfully
by anyone. Most people f ndlthat, by setting
aside plenty of time, asS_e_bywi
go s_oth y.
Before beginning assembly, carefully read the
following Information and Instructions:
• Assembly requires two people.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the exercise rack, make sure all
parts are oriented as shown in the drawings.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
The following
tools (not included)
are required
for assembly:
• Two adjustable
wrenches
• One rubber mallet
• One standard
screwdriver
• One Phillips screwdriver
• A small amount of soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Press an Endcap (11) onto each end of the two
Stabilizers (5). Slide a Handgrip (12) onto the
handle of each Stabilizer.
2.
Attach an Upright Base (3) to a Stabilizer (5) with
two M10 x 19mm Bolts (22) and two M10
Washers (18). Do not tighten the Bolts yet.
Attach the other Upright Base (3) to the other
Stabilizer (5) in the same manner.
1
11
2
12
11
11
3--
22
18
Advertisement
Table of Contents
