Advertisement
Quick Links
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
08457 089 009
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
To help us assist you, please be prepared to give the following information:
• The MODEL NUMBER of the product (WEEVBE36220)
• The NAME of the product (WEIDER
®
244 weight bench)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST in the centre of this manual)
Part No. 200612 R0903A
Printed in China © 2003 ICON Health & Fitness, Inc.
Model No. WEEVBE36220
Serial No.
Write the serial number in the
space above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.iconeurope.com
Advertisement
Related Manuals for Weider 224 WEEVBE36220
Summary of Contents for Weider 224 WEEVBE36220
-
Page 1: Ordering Replacement Parts
To help us assist you, please be prepared to give the following information: Decal • The MODEL NUMBER of the product (WEEVBE36220) QUESTIONS? • The NAME of the product (WEIDER ® 244 weight bench) As a manufacturer, we are com- mitted to providing complete •... - Page 2 Note: A PART IDENTIFICATION CHART and a PART LIST/EXPLODED DRAWING are attached in the centre of this manual. Remove the PART IDENTIFICATION CHART and PART LIST/EXPLODED DRAWING before begin- ning assembly. WEIDER is a registered trademark of ICON Health & Fitness, Inc.
-
Page 3: Important Precautions
STORING THE WEIGHT BENCH IMPORTANT PRECAUTIONS To store your weight bench, remove the Adjustment Knob (31) from the bracket on the Crossbar (3). Lift the Front Leg (8) as far as it will go. Reinsert the WARNING: To reduce the risk of serious injury, read the following important precautions Adjustment Knob into the lower set of holes in the before using the weight bench. -
Page 4: Before You Begin
BEFORE YOU BEGIN ADJUSTMENTS Thank you for selecting the WEIDER ® 244 weight reading this manual, please call our Customer Service The weight bench is designed to be used with your own weight set (not included). The steps below explain how bench. - Page 5 11. Orient the Left Fly Arm (25) so that the short side ASSEMBLY of the pivot tube is on the side shown. Short Tap a 30mm Square Inner Cap (22) into each end Side of Tube of the Left Fly Arm (25). Press a 25mm Round •...
- Page 6 3. Attach the Front Leg (8) to the Frame (2) with two 7. Tap two 19mm Round Inner Caps (9) into each M8 x 40mm Carriage Bolts (37), two M8 Washers Long Pad Tube (10). Slide the Pad Tubes into the (16), and two M8 Nylon Locknuts (17).
-
Page 7: Part Identification Chart
PART IDENTIFICATION CHART REMOVE THIS PART IDENTIFICATION CHART PART LIST/EXPLODED DRAWING This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the centre of this manual. Important: Some parts may have been pre-assembled for shipping purposes. - Page 8 PART LIST—Model No. WEEVBE36220 EXPLODED DRAWING—Model No. WEEVBE36220 R0903A R0903A Key No. Qty. Description Key No. Qty. Description Upright M6 Washer Frame Short Foam Pad Crossbar Weight Stop Leg Lever M6 x 16mm Screw Backrest Tube M6 x 38mm Screw Backrest Adjustment Knob Support Rod...