Weider Pro 4100 User Manual page 7

5.
6+
7°
Attach the Right Seat Frame (5) to the Right Leg
(73) with two 5/16" x 3 1/4" Bolts (59), two 5/16"
Washers (26), and two 5/16" Nylon Locknuts (71).
Attach the Right Seat Frame (5) to the Right
Upright (6) with two 5/16" x 3 1/4" Bolts (59), two
5/16" Washers (26), and two 5/16" Nylon
Locknuts (71).
Do not tighten the 5116" Nylon Locknuts (71)
yet.
Press a 2" Square Inner Cap (33) into the end of
the Left Seat Frame (29)°
Attach the Left Seat Frame (29) to the Left Leg
(36) with two 5/16" x 2 1/2" Carriage Bolts (57)
and two 5/16" Nylon Locknuts (71).
Attach the Left Seat Frame (29) to the Left
Updght (7) with two 5/16" x 3 1/4" Bolts (59), two
5/16" Washers (26), and two 5/16" Nylon
Locknuts (71).
Do not tighten the 5/16" Nylon Locknuts (71)
yet.
Set two Weight Bumpers (83) over the indicated
holes in the Center Base (67). Insert the two
Weight Guides (20) into the holes. Attach the
Weight Guides to the Center Base with two 5/16"
x 2 3/4" Bolts (60), four 5/16" Washers (26), and
two 5/16" Nylon Locknuts (71).
5
6
59
26
26
26
5
59
29
6O
26
26
57
33
7