Misc - Weider Pro 9625 User Manual

44. Press 3/4" Round Inner Caps (34) into the
ends of both Pad Tubes (28).
Insert one Pad Tube (28) into the Front Seat
Frame (36). Slide a Foam Pad (30) onto each
end of the Pad Tube.
Insert the other Pad Tube (28) into the Leg
Lever (29). Slide a Foam Pad (30) onto each
end of the Pad Tube.
45,
ii_i{_ii;ii{iiiiii{ii_
;iiiiii'_iiii_i;;Jl
ii!;i;i_!_,,i_i
!iiiiii!iii;i;;i;
! iZ_i
ii_i_ii_ii_ii_i_ I_i_i
Remove the backing from the PRO 9625
decal and apply it to the home gym system as
shown.
Make sure that all parts have been propedy
tightened. The use of the remaining parts will
be explained in ADJUSTMENT, beginning on
page 19 of this manual.
Before using the home gym system, pull each
cable a few times to be sure that the cables
move smoothly over the pulleys. If one of the
cables does not move smoothly, find and cor-
rect the problem. IMPORTANT: If the cables
are not properly Installed, they may be
damaged when heavy weight Is used. See
the CABLE DIAGRAM on page 23 of this
manual for proper cable routing. If there Is
any slack in the cables, you will need to
remove It by tlghtanlng the cables. See
TROUBLE-SHOOTING AND MAINTE-
NANCE on page 22.
44
45
30
30
PRO 9625
18