Featuresand Controls - Troy-Bilt 20292 Operator's Manual

Featuresand Controls
_i ead this Operator'sManual and safety rules before operating your pressurewasher.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
////
A - SprayGun-- Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Warm'rig/Operating I nstructionsTag- Identifies
hazards and proper procedure to start/stop pressure
washer.
C - Recoil Starter-- Used for starting the engine manually.
D - Nozzle Extensionwith QuickConnect-- Allows you to
switch between three different spray tips.
E- Primer Bulb -- Preparesa cold engine for starting.
F-Air Filter-- Protects engine by filtering dust and debris
out of intake air.
G - Throttle Lever-- Sets engine in starting mode for recoil
starter and stops a running engine.
H - Fuel Tank-- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
J - Pump-- Developshigh pressure.
K - AutomaticCoolDown System-- Cycleswater through
pump when water reaches125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
L - Detergent Siphoning Tube/Filter-- Use to siphon
pressure washer safe detergents into the low pressure
stream.
M - High Pressure Outlet-- Connection for high pressure
hose.
N - Water Inlet-- Connection for garden hose.
P - Oil Fill/Dipstick-- Check and fill with oil here.
R - High Pressure Hose -- Connectone end to water pump
and the other end to spray gun.
S - AccessoryTray-- Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
T- Spray Tips-- Detergent, 0°, and 25°: for various high
pressure cleaning applications.
Items Not Shown:
Data Tag (near rear of base plate) -- Provides model and
serial number of pressure washer. Pleasehave these readily
available if calling for assistance.
O
;=1
11