Features And Controls - Troy-Bilt 3000 PSI Operator's Manual

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D E
,
F
G
H
J
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Nozzle Extension with Quick Connect — Allows you to
switch between four different spray tips.
C - Air Filter — Protects engine by filtering dust and debris
out of intake air.
D - Pump — Develops high pressure.
E - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
F - High Pressure Outlet — Connection for high pressure
hose.
G - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
H - Water Inlet — Connection for garden hose.
J - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
K - Recoil Starter — Used for starting the engine manually.
L - Choke Rod — Prepares a cold engine for starting.
M - Engine Switch — Set switch to "On" for recoil starting.
Set switch to "Off" to stop a running engine.
N - Cleaning Tanks — Use to hold up to two quarts (1.9 l)
of pressure washer detergent in each tank.
P - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
R - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
S - Spray Tips — Detergent, 0°, 15° and 40°: for various
high pressure cleaning applications.
Items Not Shown:
Data Tag (near rear of base plate) — Provides model and
serial number of pressure washer. Please have these readily
available if calling for assistance.
Oil Fill/ Dipstick — Check and fill with oil here.
S
R
P
N
M
L
K
9