Table of Contents
Advertisement
General Features (Continued)
Marker Search
_
_
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when playback
reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, use '_/_ or number button to
select a Marker number that you want to recall.
3 Press ENTER.
Playback wilt start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
To Clear a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu wilt appear on the screen.
2 Within 10 seconds, use _/_ or number button to
select a Marker number that you want to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To remove the MARKER SEARCH menu, press
SEARCH.
• All markers are erased when the disc is ejected.
Changing
Video Mode
• With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
• To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback. The
new video mode selected is displayed on the TV
screen. Check whether the video quality has
improved, tf not, repeat the above procedure until pic-
ture quality is improved.
• Video mode sequence:
Auto _ Film _ Video _ Auto
• If you turn off the power, the video mode will return to
initial default state (Auto).
Detailed
Description
of each Video
Mode
Auto : The source material of the DVD video (film material or
video material) is determined from disc information.
Film : Suitable for playing film based content or video based
material recorded by the progressive scan method.
Video : Suitable for playing video based content with
comparatively little motion.
_ote
The video mode setting only works when the Progressive
Scan
mode is set to "On" in the Setup menu.
Special DVD Features
Checking
the contents
of DVD Video
discs: Menus
DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select an
option. Or, use _I/I_/A/V buttons to highlight your selec-
tion, then press ENTER.
Title Menu
1 Press TOP MENU.
If the current title has a menu, the menu wilt appear on the
screen. Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TOP MENU again.
Disc Menu
1 Press DISC MENU.
The disc menu is displayed.
2 To remove the disc menu, press DISC MENU again.
Camera
Angle
ql_
tf the disc contains sequences recorded from different
camera angles, the angle icon blinks on the TV screen.
You can then change the camera angle if you wish.
•
Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
Changing
the Audio Language
i
i
ENG
_ ,.o_
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
Changing
the Audio Channel
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (STER., LEFT or RIGHT).
Subtitles
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
_ote
tf Q appears, the feature is not available on the disc.
Screen
Saver
The screen saver picture appears when you leave the
DVDNCR
Receiver in Stop mode for about five min-
utes.
Advertisement
Table of Contents
Troubleshooting
