Search - Toshiba RD-XV48DTKB Owner's Manual

E3NG1BD_EN.book Page 27 Thursday, April 24, 2008 3:34 PM
Auto Tuning (DVB)
DVB
You can programme the tuner to scan only the DVB
channels that you can receive in your area.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U \ D],
then press [ENTER/OK].
2
Select "Channel" using [U \ D],
then press [ENTER/OK].
3
Select "DVB Channel Setup" using
[U \ D], then press [ENTER/OK].
4
Select "Auto Tuning" using [U \ D],
then press [ENTER/OK].
The unit will start storing channels available in
your area.
DVB Channel Setup
Edit Channels
Auto Tuning
Manual Tuning
Signal Information
The tuner scans and memorises all the active
DVB channels (TV / Radio) in your area.
Channel search
S. No. TV channel
1 ITV1
2 ITV2
3 Channel
4 E4
Channel48 UHF
Progress
• Press [ENTER/OK] after Auto Tuning is
completed, then the lowest memorised DVB
channel appears on the screen.
5
Press [SETUP] to exit.
You can use [PROG. G \ H] for the memorised
DVB channels.
Note
• If you press [RETURN/BACK] during the
scanning, the screen will return to the previous
displayed menu, and Auto Tuning will be
cancelled.
• If you press [SETUP] during the scanning, this
operation will stop and the lowest memorised
DVB channel will appear on the TV screen.
S. No. Radio channel
700 BBC Radio 1
701 BBC Radio 2
702 Magic Radio
Classic FM
703
690000kHz/8M
60%
Manual Tuning (DVB)
DVB
You can preset a DVB channel manually and
individually.
1
Follow steps to in "Auto Tuning
1 3
(DVB)" on this page.
2
Select "Manual Tuning" using
[U \ D], then press [ENTER/OK].
3
Select your desired position number
using [U \ D], then press [ENTER/
OK].
Manual Tuning (DVB)
Channel Auto
• The tuner will begin to search up or down
automatically. When a DVB channel is found,
the unit will stop searching.
• When "Auto" is selected the unit will search for
the channels which have not been stored in
channels memory.
4
Press [SETUP] to activate the setting.
27
EN