Table of Contents
Advertisement
DIGITAL VIDEO
DVD VIDEO PLAYER & VIDEO
CASSETTE RECORDER
SD-V593SU
OWNER'S MANUAL
©2005 Toshiba Corporation
This device does not tape-record copy protected DVD Video Discs.
2F90201A (E) COV
1
Other functions
Basic playback
Function setup
4/4/05, 9:01 PM
Introduction
2
Connections
16
Basic setup
25
Playback
32
(VCR)
Recording
37
(VCR)
42
(VCR)
45
(DVD)
Advanced
48
playback
(DVD)
58
(DVD)
Others
65
Advertisement
Table of Contents
Related Manuals for Toshiba SD-V593SU
Summary of Contents for Toshiba SD-V593SU
- Page 1 DIGITAL VIDEO DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER SD-V593SU OWNER’S MANUAL ©2005 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. 2F90201A (E) COV Introduction Connections Basic setup Playback (VCR) Recording (VCR) Other functions (VCR) Basic playback...
-
Page 2: Introduction
Introduction SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. - Page 4 Introduction IMPORTANT SAFEGUARDS 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.
-
Page 5: Power Source
IMPORTANT SAFEGUARDS 19. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20. -
Page 6: Precautions
Introduction Precautions Notes on handling When shipping the DVD/VCR, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD/VCR. -
Page 7: Table Of Contents
Contents Introduction SAFETY PRECAUTIONS ... 2 IMPORTANT SAFEGUARDS ... 3 Power source ... 5 Precautions ... 6 Contents..7 Notes and Information ... 8 Identification of controls ... 12 Connections Antenna connections ... 16 Cable TV connections ... 18 Connecting to a TV ... -
Page 8: Notes And Information
Introduction Notes and Information On handling discs Do not touch the playback side of the disc. Do not attach paper or tape to discs. On cleaning discs Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. -
Page 9: On Video Cds
About this owner’s manual This owner’s manual explains the basic instructions of this DVD/VCR. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD/VCR may not respond to all operating commands. -
Page 10: Playable Discs
DVD bearing the DVD Approx. 4 hours logo and/or every Video CD bearing the CD logo. (single sided disc) As one of the creators of DVD technology, Toshiba 12 cm DVD players are manufactured using the highest Approx. 8 hours... - Page 11 32 MB – • It is recommended that you back up your Media card data. 1 GB Toshiba is not liable for any damage caused by the use of any Media card with this unit. Toshiba will not compensate 8 MB –...
-
Page 12: Identification Of Controls
Introduction Identification of controls See the page in for details. Front panel Cassette loading slot ON/STANDBY button REC button EJECT button CHANNEL buttons AUDIO (L/R)/VIDEO IN "! (LINE IN 2) jacks Rear panel DVD COAXIAL DIGITAL AUDIO OUT jack DVD S-VIDEO OUT jack HDMI OUT jack AC power cord DVD COMPONENT... -
Page 13: Display Window
Display window Play indicator VCR indicator (VCR) Recording indicator (VCR) Track indicator (CD) Tape loaded indicator (VCR) VCR operation status Press CALL to display VCR operation status on the screen. To cancel the display, press CALL again. While watching TV DAY OF THE WEEK CLOCK 8 : 47... -
Page 14: Remote Control
Introduction Identification of controls (continued) The instructions in this manual describe the functions on the remote control. See the page in Remote control DVD/VCR button 25 * TV button 66 * CALL button DISPLAY button * CH button ZERO RETURN button SEARCH button CM SKIP button ZOOM button... - Page 15 Inserting batteries Open the battery compart- ment cover in the direction of the arrow. Caution: Never throw batteries into a fire. Notes: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.
-
Page 16: Connections
Connections Antenna connections If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page 16 for the proper connections. Antenna to DVD/VCR connection The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. - Page 17 DVD/VCR to TV connection After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV. Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram.
-
Page 18: Cable Tv Connections
Connections Cable TV connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a premium channel which is scrambled, you must have a descrambler box for proper reception. - Page 19 IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scram- bled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Con- sult your local cable company for more information concerning connection to their descrambler equipment.
-
Page 20: Connecting To A Tv
Connections Connecting to a TV Connect the DVD/VCR to your TV. Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you also connect the S-video, ColorStream Connecting to a TV Signal flow To wall outlet •... - Page 21 S-video output An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has S- Video input, and does not have component video inputs. Component video outputs PROGRESSIVE outputs Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal.
-
Page 22: Digital Video
Connections Connecting to a TV (continued) About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. -
Page 23: Connecting To Optional Equipment
Connecting to optional equipment You can enjoy high quality dynamic sounds of DVD video discs or audio CDs by connecting the DVD/VCR to optional audio equipment. For connection to your TV, see “Connecting to a TV” Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. - Page 24 Connections Connecting to optional equipment (continued) Warning When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the DVD/VCR are connected to an amplification system.
-
Page 25: Basic Setup
Basic setup Setting the video channel When a TV is connected with the 75 ohm coaxial cable only. To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). -
Page 26: Setting The Language
Basic setup Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. Setting the language Preparation: • Turn ON the TV and select to the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. •... -
Page 27: Clock Setting
Clock setting The AUTO CLOCK function will automatically set the built-in clock (Month, Day, Year and Time) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off. The DVD/VCR searches for a station in your area containing the necessary AUTO CLOCK setting signals. - Page 28 Basic setup Clock setting (continued) To set STANDARD TIME In the rare event that you live within broadcast range of two stations in two different time zones, the DVD/VCR may recognize the wrong station for the AUTO CLOCK setting. To correct the situation: Press VCR MENU.
-
Page 29: Manual Clock Setting
If the AUTO CLOCK process did not set the date and time correctly, you must set them manually for timer recording and DAYLIGHT SAVING TIME. Manual clock setting EXAMPLE: Setting the clock to “8:30 AM” March, 26 (SAT), 2005. Press VCR MENU. Press SET + or –... -
Page 30: Tuner Setting
Basic setup Tuner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. -
Page 31: Noise Elimination
To ADD/DELETE channels Repeat the step 1 on page 30. Then press SET + or – to select the “ADD/DELETE” and press ENTER. To Add or Delete desired channels 1) Press Direct channel selection buttons (0–9) or SET +/– to select a channel number you want to add or delete. -
Page 32: Playback (Vcr)
Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked Loading Push the center of the tape until it is automatically inserted. Automatic power ON When you insert a cassette tape the DVD/VCR power will turn ON automatically. Automatic playback When loading a cassette tape without an erase prevention tab, playback will start automatically. -
Page 33: Cassette Tape Playback
Cassette tape playback To play a prerecorded tape. Playback Preparation: • Turn ON the TV and select the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light). Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). -
Page 34: Special Playback
Playback (VCR) Special playback Picture search Reverse picture search function Press REV once or twice during playback. Forward picture search function Press FF once or twice during playback. To return to playback, press PLAY. SPEED SEARCH TIMES PICTURE SEARCH SPEED TAPE SPEED PRESS ONCE SP (Standard Play) -
Page 35: Zero Return Function
Convenience function Repeat playback The entire video tape will play until its end. The tape will automatically rewind to the beginning and the playback will be repeated. Press VCR MENU. Press SET + or – to select “AUTO REPEAT”. TIMER REC SET AUTO REPEAT CH SETUP SYSTEM SETUP... -
Page 36: Video Index Search System
Playback (VCR) Convenience function (continued) Clock/counter display Press CLOCK/COUNTER. The clock and tape counter alternate with each other in the display window. COUNTER CLOCK Press DVD/VCR SELECT. The DVD mode and the VCR mode alternate with each other in the display. DVD mode VCR mode Notes:... -
Page 37: Recording (Vcr) Recording A Tv Program
Recording (VCR) Recording a TV program Recording and viewing the same TV program. Recording a TV program Preparation: • Turn ON the TV and select to the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. (The VCR indicator will light.) Load a cassette tape with the erase prevention tab intact. - Page 38 Recording (VCR) Recording a TV program (continued) To stop recording Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. To stop recording temporarily Press PAUSE/STILL to avoid recording unwanted material. Press again to continue the recording. “...
-
Page 39: One-Touch Timer Recording (Otr)
One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. One-touch Timer Recording (OTR) Preparation: • Turn ON the TV and select to the corresponding video input. • Press DVD/VCR to operate the DVD/VCR. •... -
Page 40: Timer Recording
Recording (VCR) Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. Timer recording Preparation: • Press DVD/VCR to operate the DVD/VCR. • Press DVD/VCR SELECT to select the VCR mode. •... - Page 41 Setting procedure To set daily/weekly timer Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO- SA: Monday to Saturday) Timer recording Follow the procedure of timer recording on the previous page. At step 3 press SET + or – repeatedly until the desired setting appears.
-
Page 42: Other Functions (Vcr)
Other functions (VCR) Stereo recording and playback/ Second Audio Program (SAP) Stereo recording and playback The VHS Hi-Fi audio system permits high fidelity record- ing of MTS STEREO TV broadcasts. When a MTS STEREO broad- cast is received, “STEREO” will appear on the screen for about 4 seconds and the program can be viewed or recorded in stereo. -
Page 43: Recording
Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. Duplicating a video tape Preparation: • Turn ON the TV and select the corresponding video input. -
Page 44: Recording A Dvd/Cd Disc
Other functions (VCR) Recording a DVD/CD disc You can record disc material in DVD, Audio CD, etc. onto a Video tape with this DVD/VCR. Duplicating a DVD or CD disc Preparation: • Turn ON the TV and select the corresponding video input. -
Page 45: Basic Playback (Dvd)
Basic playback (DVD) Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. Basic playback Preparations: •... - Page 46 Basic playback (DVD) POWER C/D/B/A STOP PLAY PAUSE/STILL DVD/CARD DVD/VCR SELECT OPEN/CLOSE Basic playback To pause playback (still mode) Press PAUSE/STILL during playback. To resume normal playback, press PLAY. • The sound is muted during still mode. To stop playback Press STOP.
-
Page 47: Playing Frame By Frame
Playing a disc (continued) You can play discs at various speeds. Playing in fast reverse or fast forward directions Press REV or FF during playback. REV: Fast reverse playback Fast forward playback Each time you press REV or FF, the playback speed changes. -
Page 48: Advanced Playback (Dvd)
Advanced playback (DVD) Zooming/Locating desired scene Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. Press ZOOM during playback. The center part of the image will be zoomed in. -
Page 49: Marking Desired Scenes
Marking desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene. Marking the scenes Press MARKER during playback. Marker 1 Marker 2 Marker 3 /Enter/Clear/Marker Select the blank Marker using C or D. Then press ENTER at the desired scene. -
Page 50: Repeat Playback
Advanced playback (DVD) Repeat playback/A-B Repeat playback Repeat playback Press PLAYMODE during playback or stop mode. [DVD] Press B B B B B /A A A A A to select “Chapter” or “Title”. Repeat /Play Mode The unit automatically starts repeat playback after finishing the current ti- tle or chapter. -
Page 51: Program Playback
Program playback/Random playback You can arrange the playback order of tracks or files on the disc. And also the unit selects tracks or files at random and playback them. These feature works for Audio CD, Video CD and MP3/WMA/JPEG Program playback Press PLAYMODE during stop mode. -
Page 52: Changing Angles
Advanced playback (DVD) Changing angles/Title selection/DVD menu Changing angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. Press ANGLE during playback. The current angle will appear. Title selection Two or more titles are recorded on some discs. -
Page 53: Changing Soundtrack Language
Changing soundtrack language/ Setting surround sound Changing soundtrack language You can select the language when you play a multilingual disc. Press AUDIO during playback. The current soundtrack language will appear. 2/8 Fra Dolby Digital QSound Off Press AUDIO repeatedly until the desired lan- guage is selected. -
Page 54: Subtitles
Advanced playback (DVD) Subtitles/To turn off the PBC Subtitles When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. Press SUBTITLE repeatedly during playback until your desired language appears. To turn off the subtitle, press SUBTITLE until “Off”... -
Page 55: Mp3/Wma/Jpeg Operation
Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3/WMA files). Given the fact that technology in this area is still maturing, Toshiba cannot guarantee that all genre of recordable discs will produce optimal playback quality. The technical criteria set out in this owner’s manual are meant as a guide only. - Page 56 Advanced playback (DVD) MP3/WMA/JPEG operation (continued) CAUTION Do not insert any foreign objects into the Media card slot as this can result in a risk of fire or electric shock. Place a CD-R/RW on which MP3, WMA or JPEG files have been recorded onto the disc tray or insert a Media card on which MP3, WMA or JPEG files have been recorded into the media card slot on the front panel.
- Page 57 CAUTION Do not insert any foreign objects into the Media card slot as this can result in a risk of fire or electric shock. JPEG playback CARD Place a CD-R/RW on which JPEG files have been recorded onto the disc tray, or insert a Media card on which JPEG files have been recorded into the appropriate media card slot on the front panel.
-
Page 58: Function Setup (Dvd)
Function setup (DVD) Customizing the function settings You can change the default settings to customize performance to your preference. Setting procedure Press SETUP during stop mode. The following on-screen display appears. /Enter/Setup/Return Press B or A to select the desired section, then press D or ENTER. - Page 59 Customizing the function settings (continued) Setting details Section Option Menu Subtitle Audio E.B.L. TV Screen Display Picture Mode JPEG Interval Dialogue QSound Digital Out Password Parental Select Files HD Jpeg Output 2F90201A (E)p59-63 Details To select the language of “Menu”, “Subtitle” and “Audio”...
- Page 60 Function setup (DVD) Customizing the function settings (continued) Setting details Menu Subtitle Audio Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list”...
- Page 61 Picture Mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed.
- Page 62 Function setup (DVD) Customizing the function settings (continued) Setting details Password Parental Select Files HD Jpeg Output Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1) Press C or D to select “Parental”, then press B or A until the level you require appears.
- Page 63 Output You can select the video output signal of the DVD video player to the TV from “Interlace” or “Progressive”. 1) Press C or D to select “Output”. 2) Press A, then press C or D to select “Interlace” or “Progressive”.
-
Page 64: Temporary Disabling Of Rating Level By Dvd Disc
Function setup (DVD) Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. Load a DVD disc and press PLAY or OPEN/ "# CLOSE on the unit... -
Page 65: Others
Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” Language Name Code Language Name Code Abkhazian 1112 Fiji Afar 1111 Finnish Afrikaans 1116 French Albanian 2927 Frisian Amharic 1123 Galician Arabic 1128 Georgian Armenian 1835... -
Page 66: Setting Tv Control Codes
The remote control can be compatible with various brands of TV/ Cable box/DSS ® satellite receiver by setting their control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs. Setting TV control codes Press TV to set the remote control operating your TV. -
Page 67: Table Of Cable Box Brand Codes
• If you replace the remote control’s batteries, set the brand code again. 2F90201A (E)p64-69 ® satellite Table of Cable box brand codes Brand name of Brand Code your cable box Toshiba satellite receiver. Anvision 13, 20, 21, 22, 23, 24, 25, 26, 58, 62, 84 Archer 29, 42, 44,... -
Page 68: Troubleshooting
Others Troubleshooting Before calling a service technician, please check the following table for a possible cause of the symptoms and some solutions. Symptoms DVD/VCR DVD/VCR does not operate. No picture. No sound. The remote control does not function. No Cable TV reception. TV recording does not work. -
Page 69: Specifications
Specifications General Power supply Power consumption Weight Dimensions Tuner Antenna input/output RF channel output Color system Video head Audio track Hi-Fi frequency response Hi-Fi dynamic range FF/REW time at 25˚C (77˚F) Applicable disc Frequency range S/N ratio Harmonic distortion Wow and flutter Operating conditions Input/Output DVD/VCR... -
Page 70: Limited Warranty
Limited United States Warranty DVD/VCR Combinations - Exchange Warranty Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DVD/VCR COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. - Page 71 DVD/ VCR Combination to and from the Authorized TACP Service Station. For additional information, visit TACP's website: www.tacp.toshiba.com ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND...
- Page 72 ColorStream and ColorStream Pro are registered trademarks of Toshiba America Consumer Products, L.L.C. Printed in Thailand 2F90201B (E)p70-BACK 5/9/05, 4:32 PM...