Table of Contents
Advertisement
I
I
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
Solution
No power.
• The power cord is disconnected.
• Plug the power cord into the wal! outlet
securely.
The power is on, but the
. No disc is inserted.
• Insert a disc or tape. (Check that the
DVD/VCR Receiver
. No tape is inserted,
disc or tape indicator in the display
does not work.
window is lit.)
No picture.
. The TV is not set to receive DVDNCR
• Select the appropriate video input mode
Receiver signal output,
on the TV so the picture from the
DVDNCR
Receiver appears on the TV
screen.
• TVNCR
mode for DVD/VCR Receiver is
• Press the TV/VCR button on the remote
set to TV MODE.
control repeatedly to choose VCR
mode. VCR MODE appears in the dis-
play window.
• The video cable is not connected
• Connect the video cable securely.
securely.
• The connected TV power is turned off.
• Turn on the TV.
• The equipment connected with the
• Select the correct input mode on the
No sound,
audio cable is not set to receive
audio receiver so you can listen to the
DVDNCR
Receiver signal output,
sound from the DVDNCR
Receiver.
• The audio cables are not connected
• Connect the audio cable securely.
securely.
• The power of the equipment connected
• Turn on the equipment connected with
with the audio cable is turned off.
the audio cable.
• The audio connecting cord is damaged.
• Replace it with new one.
The playback picture is
. The disc is dirty.
• Clean the disc.
poor.
• Tape heads are dirty.
• Clean video heads.
• Tape is a rental or was recorded on
• Use CH/TRK (A/T) for manual tracking
another VCR.
adjustment while tape is playing.
The DVDNCR
Receiver
• No disc is inserted.
• Insert a disc or tape. (Check that the
does not start playback.
. No tape is inserted,
disc or tape indicator in the display
window is lit.)
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type, color system, and Regional code.)
• The disc is placed upside down.
• Place the disc with the playback side down.
• The disc is not placed within the guide.
• Place the disc on the disc tray correctly
inside the guide.
• The disc is dirty.
• Clean the disc.
• The Rating level is set.
• Cancel the Rating function or change
the rating level.
The remote control
. The remote control is not pointed at the
• Point the remote control at the remote
remote sensor of the DVD+VCR.
sensor of the DVD+VCR.
does not work properly.
• The remote control is too far from the
• Operate the remote control within 23 ft
DVD+VCR.
(7 m).
• There is an obstacle in the path of the
• Remove the obstacle.
remote control and the DVD+VCR.
• The batteries in the remote control are
• Replace the batteries with new ones.
exhausted.
• This remote control use the same
• When using a VCR, first press the VCR
buttons for VCR and DVD functions
button. When using a DVD, first press
(ex. PLAY).
the DVD button.
m
m
I
I
Advertisement
Table of Contents
Troubleshooting
