Table of Contents
Advertisement
I
I
VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, Another VCR).
DVD/VCR OUT (VIDEO/AUDIO
(Left/Right))
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE
SCAN VIDEO OUT
(Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs. FOR DVD
VIEWING ONLY.
ANT.IN
Connect the VHF/UHF/CATV
antenna to this terminal.
__
/
AC Power Cord
source.
[P
ug nto the power
RF.OUT (DVD/VCR OUT) I
Connect to a TV with RF coaxia! inputs. I
S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV. FOR DVD VIEWING ONLY.
SPEAKER Connectors
Connect the six supplied speakers to these terminals.
DIGITAL AUDIO IN (OPTICAL)
Connect to a digital audio output on a digital device.
AM Antenna Connectors
Connect the AM antenna to this terminal.
FM Antenna Connector_
Connect the FM antenna to this terminal.
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic
discharge may cause permanent damage to the unit.
Remote
Control
Operation
Range
Point the remote control at the remote sensor and press
the buttons.
• Distance: About 7m (23ft) from the front of the
remote sensor
• Angle:
About 30 ° in each direction of the front of the
remote sensor
Remote control battery installation
L_;
Detach the battery cover on the rear of
the remote control, and insert two nO3
(size AAA) batteries with © and •
aligned correctly.
_Caution
Do not mix old and new batteries.
Never mix different
types of batteries (standard, alkaline, etc.).
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF IN A SAFE MANNER IN COMPLIANCE
WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.
m
m
I
I
Advertisement
Table of Contents
Troubleshooting
