Advertisement
Controls
Models: G2250S& G3250S
The engine was shipped without engine oil. DO NOT START THE
ENGINE WITHOUT FILLING THE ENGINE WITH 01L. Use SAE 10W-
30 for normal conditions and SAE 5W-30 when the ambient tem-
perature is below 32° F.
Primer Bulb
The provide to provide an
enriched fuel mixture when
starting a cold engine. Push
the primer bulb 3 to five times
before starting a cold engine.
Recoil Starter
To start the engine, pull the starter grip lightly until resistance is felt,
then pull briskly.
NOTICE:
Do not al/ow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter.
Ground Terminal
The generator ground terminal is connected to the frame of the genera-
tor, the metal non-current-carrying parts of the generator, and the
ground terminals of each receptacle.
Before using the ground terminal, consult a qualified electrician,
electrical inspector or local agency having jurisdiction for local
codes or ordinances that apply to the intended use of the genera-
tor.
Engine Switch
To start and stop the engine.
Ground Terminal
Engine ON / OFF switch
Rev. 7/2010
STANLEY is a registered trademark of The Stanley Works or its affiliates and are used under license by GXi Outdoor Power LLC.
No part of this publication can be printed or copied without written permission.
9of16
Advertisement
