Table of Contents
Advertisement
I Remote
Control
These pages describe the buttons on the remote control
used to operate the receiver.
_7 _ Number
buttons
These buttons can perform a variety of different
functions
depending
on the remote operation
mode.
• [RECEIVER operations (press RECEIVER first)]
DD : Press repeatedly to select the standard Dolby/
I
@
RECEIVER button
DTS mode and the ADVANCED THEATER modes.
(VSX-D608) (Refer to page 30, 32)
Selects the 1311 ( Dolby) mode.(VSX-Dh08)
(Refer to page 31)
DSP MODE : Press repeatedly
to select a DSP sound
mode (refer to page 31),
MIDNIGHT : Press to hear surround
sound effectively
at low volumes (refer to page 35).
CH.SELECT : Use to select a speaker when adjusting
speaker levels.
TEST TONE : Press to switch the test tone on or off
when listening
to a surround
mode (refer to page 21).
A'n" : Press to attenuate (lower) the level of the input
signals and prevent distortion
(refer to "Display",
_),
Overload indicator
on page 24).
SIC.SELECT : When the same component
uses both
analog and digital connections,
use to select input
signals as digital or analog.
CH.LEVEL (-/+) : Use to adjust individual speaker levels.
EFFECT (+/-) : Use to adjust the DSP mode effect level.
• [TUNER operations [press TUNER first)]
Number buttons (0~9) : During preset tuning, use to
input the number of the preset station. Use to input
the station frequency
during direct tuning.
CLASS (+10) : Press repeatedly to switch the preset
station classes during preset tuning.
MENU : Press to activate direct tuning.
Press to switch the receiver on or to put in standby.
MUTING
button
Press to mute the volume. "MUTING"
appears in the
display. Press again to cancel.
z_/_F/<_/D/ENTER
buttons
Specific use of these buttons is described in
conjunction with the operations they are used in.
ENTER : Press to switch the band (FM/AM) when
using the tuner.
VOL
(+/-)
buttons
Press to adjust the volume. When VOL (+/-) buttons
are pressed while muting,
muting is canceled.
® CHANNEL
(+/-)
button
Use to select preset stations when operating
the
tuner. When the remote is used to control other
components,
this button may be used to change
channels, tracks, or chapters.
® MULTI
CONTROL
buttons
Use these buttons to select the remote operation
mode.
For example, pressing TUNER sets the remote to
operate the tuner functions.
® FUNCTION
button
Press repeatedly
to select a source.
_9_MODE CHECK button
Press to confirm the current remote operation mode
and to switch operation modes without changing the
source (refer to page 51).
Power button
Press to turn on or put in standby all connected
components
other than this unit.
TV/TV
FUNC button
Press TV to turn the TV's power on or put in standby.
Press TV FUNC to select the TV for remote control
operation.
_
RECEIVER button
Press to select the receiver for remote control
operation.
_!3)FL DIMMER
button
Press to adjust the brightness
of the fluorescent
display. Four levels of brightness ranging from very
dim to very bright can be selected.
_1_COMMANDER
SET UP button
Use to customize
the remote control functions.
(Refer to "Setting
Up the Remote Control"
starting on
page 22.)
_5_DIRECT button
Use to playback original source audio. When DIRECT
is ON, Dolby, DSP, LOUDNESS, DNR [VSX-D6O8 only)
and MIDNIGHT mode are automatically turned OFF.
25
<ARe7157>
Hide quick links:
Advertisement
Table of Contents
