Setting Up The Remote Control - Pioneer VSX-D508-G Operating Instructions Manual

Setting Up the Remote Control 1
In addition to controlling the receiver, the supplied remote control can operate your other components (DVD, MD, VCR,
TV, LD, CD, etc.). If your component(s) are listed in the "Preset Code List" on page 56, simply recall the corresponding
preset code.
Recalling preset codes
The following steps show you how to recall preset codes for each MULTI CONTROL button. Once the preset code is
assigned, pressing the button will automatically set the remote to operate the respective component.
• Refer to "Preset Code List" on page 56 for the components and manufacturers available.
• Refer to "Remote Controlling Other Components" on pages 44 to 50 and "Background Control of Other
Components" on page 51 for detailed explanations on how to operate your other components.
1
1
Press COMMANDER SET UP and 1 at the same time to
select the preset mode.
The MULTI CONTROL buttons on the remote control start to blink,
i
I LI f J r I
I_1 I_1 I I_n
To cancel the preset mode
Press COMMANDER SET UR
2
Press the MULTI CONTROL button for the component VOU
want to control,
Each button can be set to control one of the following components
: DVD/LD player
: TV or Satellite tuner
: CD player
: MD recorder or Tape recorder
: Video deck
: Video deck
: TV or Cable TV tuner
The selected button lights steadily and the first manufacturer (and
preset code(s)) appear in the display.
22
<ARB7157>