Pioneer VSX-D508-G Operating Instructions Manual page 32

Switching the Dolby/DTS mode (ADVANCED THEATER mode)(VSX-D608 only)
Switch the Dolby/DTS mode by pressing the DO button. When Dolby/DTS mode is ON, Dolby Pro Logic, Dolby Digital,
and DTS signal processing is performed automatically corresponding to the input signal.
Switch the Dolby/DTS mode on and off by pressing 00 on
the remote control or 00/DTS on the front panel.
Each presschangesthe display as follows.
T STANDARD _ MUSICAL _ DRAMA
OFF 4-- 5-D THEATER _ ACTION
Refer to page 28 for more details about each surround effect.
• The effects of Dolby/DTS mode can be adjusted in the range of 10 to 90
by pressing EFFECT ÷/-, (The default setting is 70). Also, the effect level
can be set in each Dolby/DTS mode by pressing the EFFECT(+/-) button.
STANDARD and 5-D THEATER modes cannot be changed.
• If the ADVANCED THEATER mode (MUSICAL, DRAMA, ACTION) is ON
when the digital input is selected, the overload indicator may flicker. If
this bothers you, set the ADVANCED THEATER mode to STANDARD.
no/DTS
I
32
<ARB7157>