Table of Contents
Advertisement
HOW TO USE THE ELLiPTiCAL
HOW TO PLUG iN THE POWER CORD
This product must be grounded, if it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock. This product is equipped with a cord having
an equipment-grounding
conductor and a grounding
plug.
Plug the power cord into an appropriate outlet that
is properly installed and grounded in accordance
with all local codes and ordinances. This product is
for use on a nominal 120-volt circuit. IMPORTANT:
The elliptical is not compatible with GFCFequipped
outlets and may not be compatible
with AFCi-
equipped
outlets.
A temporary
adapter may
be used to
Outlet Box
connect the
Adapter
power cord
Power Cord
to a 2-pole
receptacle as
shown at the
Lug
right if a prop-
Metal Screw
erly grounded
outlet is not
available.
The temporary adapter should be used only until a
properly grounded outlet can be installed by a qualified
electrician.
The green-colored
rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified electrician
to determine if the outlet box cover is grounded before
using an adapter.
HOW TO MOVE THE ELLiPTiCAL
Due to the size and weight of the elliptical,
moving
it requires
two persons. Stand in front of the elliptical,
hold the upright, and place one foot against one of the
wheels. Pull on the upright and have a second person
lift the handle on the ramp until the elliptical will roll on
the wheels. Carefully move the elliptical to the desired
location, and then lower it to the floor.
!oP_l_
e
upright
here
Place
your
foot
here
14
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
