12. Orient the Rear Console Cover (80) as shown.
Attach the Rear Console Cover (80) to the
Upright (4) with four M4 x 16mm Screws (101).
12
8O
13. While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Upper Wire (152) and to the
Right and Left Sensor Wires (108, 110).
Insert the excess wire into the Upright (4) or into
the Console (7).
Tip: Avoid pinching the wires. Attach the
Console (7) to the Upright (4) with four M4 x
12mm Screws (148).
13
7\
Avoid pinching
the wires
148
11