Table of Contents
Advertisement
HOW TO ADJUST THE DRIVE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is adjusted to the highest
level, the drive belt may need to be adjusted.
To adjust the drive belt, you must first lift the Latch
(50) on the underside of the Left Pedal Arm (13), and
lift the Left Pedal Arm off the left Pedal Arm Sleeve
(46).
Next, remove the indicated M8 x 25mm Patch Screw
(121), Large Axle Cover (113), M8 Washer (95), and
Pedal Arm Sleeve (46). Using a flat screwdriver, care-
fully pry the left Disc (17) off the elliptical exerciser.
113
46
95
Next, loosen the Pivot Screw (97). Tighten the Belt
Adjustment Screw (85) until the Drive Belt (38) is tight.
When the Drive Belt is tight, tighten the Pivot Screw.
When you are finished, reattach the left disc.
2O
Hide quick links:
Advertisement
Table of Contents
