Fisher & Paykel OB60 Series Installation Instructions And User Manual page 5

Electronic and pyrolytic models
Hide thumbs Also See for OB60 Series:
Table of Contents

Advertisement

Safety and warnings
3
The oven will rest on a surface that can support its weight.
The benchtop and oven cavity are square and level, and are the required dimensions.
The height from the floor suits the user.
The oven door can open fully without obstruction.
If the supply cord is damaged, it is replaced by the manufacturer, its service agent, or a similarly
qualified person in order to avoid a hazard.
When you install the oven
Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing difficult.
Fisher & Paykel will not cover the costs of removing the oven, or of damage caused by this
removal.
Use the supplied screws to secure the oven to the cabinetry. Do not over-tighten the screws. (See
Fig. 1)
Do not stand on the door, or place heavy objects on it.
Do not lift the oven by the door handle.
2.5 mm
Figure 1 Securing the oven to the cabinetry

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents