Fisher & Paykel OB60 Series Installation Instructions And User Manual page 36

Cooking functions
34
Notes on baking:
Preheat the oven before baking
Do not place anything, including water or ice on the oven floor
Cooking troubleshooting
do•Lo appears during cooking
1
Oven not working properly.
What to do:
Turn the function selector to O,
Wait for the oven to cool down completely.
Disconnect the oven from the mains.
Call your Authorised Service Centre.
Note: if 'do•Lo' appears during the pyrolytic self-clean cycle then you should be able to use your
oven again once it has cooled down completely. See the 'Care and cleaning' section.
Display OFF
2
Oven not working properly.
What to do:
Turn the function selector to 0 (oven OFF)
Wait for the oven to cool down completely.
Switch the oven off for a few seconds.
If after this procedure the display is still off:
Disconnect the oven from the mains.
Call your Authorised Service Centre. The oven must not be used.