Fisher & Paykel OB60 Series Installation Instructions And User Manual page 28

Care and cleaning
26
Replacing the middle and inner
panes of glass
Make sure the door is locked open
1
(see Figs 21a - 21c)
Replace the middle pane:
2
Check that the four rubber pads are in
place ("M" in Fig. 23a)
Check that you are holding the pane the
correct way. You should be able to read the
wording on it as it faces you.
Gently insert the top edge of the pane into
the top clamps (arrow 1 in Fig. 23b), then
lower the pane and insert the bottom edge
into the bottom clamps (arrow 2 in Fig.
23b); and then slide the pane into position
(Fig. 23c)
M
2
1
1
Fig.23a
Fig.23b
Fig.23c