Fisher & Paykel OB60 Series Installation Instructions And User Manual page 15

Using the control buttons
13
Setting the clock
When first connected, or after a power failure, '0:00' will show on the display.
To set the clock, press the and buttons together and then press the and buttons.
Note: Changing the time will delete any automatic program.
Using the timer
You can use the timer at any time, even when the oven is not in use. The timer does not turn the
oven off.
The timer can be set for up to 23 hours and 59 minutes.
To set the timer, press the button, then the and buttons.
To check the remaining time press the button.
When the time is up, the timer will beep. Press any button (except the button) to turn it off.
Turning the oven on and off
To turn the oven on, press the button. 'On' appears for two seconds on the display, the oven
lamp lights up, and then the time appears on the display. You can now operate your oven.
If you do not use your oven within three minutes, it automatically goes back to stand-by. 'OFF'
appears for some seconds on the display, the oven lamp goes off, and then the time appears on
the display.
To turn the oven off, press the button.
Note: do not turn the oven off if you have set it for automatic cooking.
Childlock
In Childlock you can only turn the oven off, use the timer, and check the remaining cooking time
or the end of the cooking time. You can set Childlock during cooking.
To set the Childlock, press the button for about five seconds. The display shows 'n--O' , 'On' and
then the time appears again.
To release the Childlock, press the button for about five seconds. The display shows 'n--O' ,
'OFF' and then the time appears again.