Hooking Up The Tv/Vcr - Philips/Magnavox CCZ192AT Owner's Manual

6 H001dng UpThe TV/VCR
I
Hook up yourTV/VCR using one of the connections shown.
A Connect a Cable signal
• or a/1 antenna to the
Hooking UpYourTV/VCR ANT(enna) Jack.
With a Cable Signal or
Outdoor Antenna
B•
Hooking UpYour "FVNCR
With a Cable Box
To view any channel,set theTV/VCR
to the Cable Box output channel
(channel03 or 04).Then, select chan-
ne)sat the Cable Box.
|
Connect the Cable signalto , l
the IN Jackon the Cable Box.
Connect an RF coaxialcable (75-
ohm,not supplied) to the OUT Jack
on the CableBox and to the
ANT(enna) Jackon the TV/VCR.
CO
Hooking Up Your'I'V/VCR
With an Indoor Antenna
To installa rod antenna(not sup-
plied),pushthe stem of the antenna
into the antennahole on the top of
the'I'V/VCR. Connect the antenna
wire to the ANT(enna) Jackon the
back of the'l-V/VCK as shown.
Extend the antennaand adjustits
length,direction,and anglefor the
clearest picture.
I RodAntenna
(not supplied)