Table of Contents
Advertisement
Rerecording
(Tape Duplication) 31
AUDIO andVIDEO OUT Jackson source unit
(VCR or Camcorder)
AudioCable(white) from
AUDIOOUT toAUDIO
_"
"'_
AUDIO and VIDEO
Video Cable (yellow) lrom
Jacks o nTVNCR
VIDEO OUT tOVIDEO
I
Make the connections shown above, using audio and video
cables. (Make sure the source unit is connected to a
power source.)
2
The source unit (VCR or camcorder) will playyour tape. Insert a
prerecorded tape in the source unit. If playback begins, p ress
the STOP button on the unit.
3
The TV/VCR will record your tape. Insert a blank tape in the
TV/VCR. Make sure the tape's record tab is intact.TheTV/VCR
power will turn on automatically.
4
Point theTV/VCR
remote control
at theTVNCR.
Press
Number buttons 0; 0 so that A/V IN appears on-screen.
5
Point the TV/VCR remote control at the TV/VCR. Press
the SPEED button until the desired tape speed (SP, LP, or
SLP) appears on-screen.
6
Press the pLAY button on the source unit and the
REC(ord)/OTR
button on yourTV/VCR
at the same time.
Copying will begin.
7
To stop copying, press the STOPIEJECT
button
on the
TV/VCR,
then stop the tape on the source unit (VCR or
cameorder_.
Unauthorized recordingofcopy-
righted television p rograms,video
tapes,or othermateria/s may
infringe on the rights of copyright
ownersend violate copyright laws.
Different brands of equipment m ay
operate different.
Make sureall connectJons
are
secure. 0therwise,you maynot
recordbothpicture andsound,
Audioand video cables are not
included.
Advertisement
Table of Contents
