Hooking Up The Tv/Vcr - Philips/Magnavox CCA092AT Owner's Manual

6 Hooking Up the TV/VCR

1
Hook up your TV/VCR using one of the connections shown.
A.
Hooking Up Your TV/VCR With a
Cable Signal or Outdoor Antenna
B.
Hooking Up Your TV/VCR
With a Cable Box
To view any channel, set the TV/VCR to the
Cable Box output channel (channel 03 or 04).
Then, select channels at the Cable Box.
Connect a Cable signal
or an antenna to the
ANT(enna) Jack.
DC 13.2V
AC 120V
ANT
Connect the Cable signal to
the IN Jack on the Cable Box.
Connect an RF coaxial cable (75-
ohm, not supplied) to the OUT Jack
on the Cable Box and to the
ANT(enna) Jack on the TV/VCR.
DC 13.2V
AC 120V
ANT
ANT.
IN
OUT
ANT.