Changing The Preset Options - Fisher & Paykel DW820 Installation Instructions And User Manual

Changing the pre-set options
End of programme beeps
The beeps at the end of each wash programme can be removed by following the steps below.
Press the POWER button to turn the Dishwasher off.
1
Press the ECO button and while holding down, press the START/PAUSE button and hold
2
together for approximately five seconds until you hear one short beep.
Release the two buttons and the "beeps" are now removed.
3
If you wish to re-instate the beeps at the end of the wash programmes, repeat the steps
above.
16