Fisher & Paykel DW820 Installation Instructions And User Manual page 23

Problem
Water does not flow.
Water spots, streaks or
film on glassware.
Foaming.
Dishes not dry.
Detergent not dispensing. Detergent dispenser lid not
Possible cause
Taps turned off.
Inlet hose bent or kinked.
Incorrect rinse aid setting.
Dishwasher overloaded or
loaded incorrectly.
Rinse aid setting too high or
has been spilled.
Incorrect detergent.
Egg yolk.
Too much detergent.
Incorrect loading.
Rinse aid supply depleted.
opening.
Dispenser was wet when
detergent is loaded.
Blocked spray arms.
Over filling the detergent
dispenser.
What to do
Check the taps are turned
on.
Straighten the inlet hose so
that water can flow through.
Check that there is rinse aid
in the dispenser (see Rinse
aid section).
Follow the instructions for
proper loading. Remember
to remove food scraps.
Turn the rinse aid dial to a
lower setting or wipe the spill.
Ensure that you use a
detergent that is intended
for a domestic automatic
dishwasher.
Place an extra tablespoon of
detergent in the dishwasher
door for pre-rinsing.
Use the recommended
quantity of detergent.
Moisture can be trapped if
items are too closely loaded.
Ensure the dishwasher is not
overloaded.
Refill the rinse aid dispenser
if the indicating window is
clear.
Check that there is nothing
obstructing the opening of
the dispenser lid.
Dry the detergent dispenser
before loading to prevent
detergent caking.
Remove spray arms, shake,
and rinse under water
before replacing (see Care &
cleaning section).
Use the recommended
quantity of detergent.
21