Philips 55PP9352 Directions For Use Manual page 9

Connecting Accessory Devices to Your TV
presented here is a connection example
invoh4ng a VCR and cable box.
Rq/er to the VCR k directionsJbr-use manual
/br jilrther #l/brmation on connections.
7b make the connections in this example, you
will need"
• one, two-way signal splitter
• two coaxial cables (75_)
• one cablejbr a video connection lstandard
RCA connecto 0
• two cablesjbr audio connections (standard
RCA connectors) (only one cable is needed
jbr connection to a nonstereo VCR).
NOTE: ZTw cables are not supplied with your
TE You shouM be able to buy them at most
stores that sell electronics. Or you can call
our Customer Care Center at
1-800-53!-0039.
Connect a cable TV signal to a two-
way signal splitter,
Connect one of the two-way signal
splitter outputs to the INPUT on the
cable box.
Connect the other two-way signal splitter output to the ANTENNA IN
75_ on the rear of the TVI
Connect from the cable box OUTPUT jack to the ANT IN jack on the rear of
the VCR.
Connect the VIDEO OUT jack on
the VCR to the INPUT-AV 1 VIDEO
jack on the rear of the TV,
ConnecttheAUDIO OUT R(ight)
and L(efl)jacks on the VCRto
INPUT-AV 1AUDIOjacks on the rear
ofthe TV.
NOTE: if the VCR is a nonstereo unit,
connect only the left audio cable,
which usually has a white connector.
Press the AV button on the remote control as many times as necessary
to select the AVI source,
Turn the VCR on and push PLAY to
view a videotape,
Rear ofVCR"
I I
/
• _mple: Phlllps
(_CR model
VR674CA_
RearofTV
I I
[]
S" nal
a_lt_r
Rear of Cable Box
To simplify making connedions, the connectors
on audio and video canes are often color
coded. The jacks on your TV are likewise color
coded to malch lhe conneclors,
The coding is as follows:
• Yellow for video (composite)
• Red for the righl audio channel
• White for the left audio channel
NOTE: if your VCR is mono (nons_ereo),
you will connect only one audio cable. You
musl ensure lhal the TV is set k3 MONO for
Ihe signal source to which you've connected
Ihe VCR (INPUT-AV l, INPUT-AV 2, or the
side panel inputs [AV3]). O_herwise, you will
receive sound from only one of the TV's
speakcrs. See page 36.