Philips LX3500D Quick Use Manual

C
ONNECTING THE
TV (
Quick Use
Quick Use
MODELS
Guide
Guide
1
Using the supplied Pr/Cr Pb/Cb Y cable, connect from the
player/receiver Pr/Cr Pb/Cb Y jacks to the TV HD
INPUT-AV 4 R/Pr B/Pb G/Y jacks.
2
Using the supplied audio cable, connect from the TV
AUDIO OUTPUT TV jacks (Left and Right) to the
player/receiver AUDIO IN jacks (Left and Right).
3
Using the supplied speaker wires, connect the speakers:
a
Connect the speaker wire with red and black tips
to the player/receiver's red (+) and black (–) termi-
nals labeled "FR." Then connect the other end of
the wire to the terminals on the speaker labeled
"FRONT R."
Again matching the colors and using the labels as your
guide, connect wires from the player/receiver terminals
to the terminals on the left front speaker and the center
speaker.
b
As in step 3a, connect from the player/receiver to the
rear speakers (surround left and right).
c
Using the supplied subwoofer connection cable,
connect from the player/receiver WOOFER LINE
OUT jack to the subwoofer Audio Input jack.
4
Slide the P-SCAN switch (located on the back panel) to the
"ON" position. This puts the DVD player in progressive-scan
mode.
IMPORTANT: Turn the player/receiver off before switching
to progressive-scan mode. Progressive-scan mode cannot be
activated when the player/receiver is on.
5
Connect the AM loop antenna to the AM jack by aligning
the plug with the AM jack and pushing in. When the system
is on, position the antenna to receive the clearest sound.
Connect the FM antenna to the FM jack by pushing the
black end of the wire into the center of the connector pin.
When the system is on, move the antenna in various direc-
tions until the clearest signal is received.
6
Plug the player/receiver power cord into the AC outlet on
the wall. Plug the subwoofer power cord into the AC outlet
on the wall.
LX3500D DVD H
OME
46PP9302, 55PP9352, 60PP9352, 55PP9502,
Cables and Wires (Supplied) Needed to Make the Connections
Pr/Cr Pb/Cb Y Audio Cable Speaker Wires
Video Cable (one, with two
(one, with three RCA-type
RCA-type connectors)
connectors)
Back of TV (appearance of jack panel varies based on model)
ANTENNA IN 75 AMP SWITCH
EXT INT
1
_
+
HD INPUT-AV 5
DVI
CENTER CHANNEL AMP INPUT
HD INPUT-AV 4
G/Y
R/Pr
INPUT-AV 1 OUTPUT INPUT-AV 2 SUBWOOFER
Y
B/Pb
VIDEO VIDEO
S-VIDEO
S-VIDEO
L
L Pb
V
L L L L
SYNC
AUDIO AUDIO AUDIO AUDIO
Pr
H
R R R R
AM Indoor Loop
Antenna
5
COMPONENT
PrCr PbCb Y
VIDEO OUT
AM
CENTER
LINE OUT AUDIO OU AUDIO IN OFF
FM Indoor Antenna
R
AM/FM
WOOFER
ANTENNA AUX
LINE OUT
Audio
Input
3b
180
3c
Phase
0
Back of
Subwoofer
C S Y
INEMA YSTEM TO OUR
AND
Subwoofer AM Indoor Loop
(five) Connection Antenna (one)
Cable
H H
ELPFUL INTS
• For models 55PP9502 and 60PP9502, do not use the center channel amp input, amp
switch, and subwoofer output jack on the TV with the LX3500D Home Cinema System.
They will interfere with the sound quality.
• The connection shown in this example is for progressive-scan DVD, which requires that
you connect to HD INPUT-AV 4 on your TV, not to the standard component video inputs
(CVI), labeled Y Pb Pr, under INPUT-AV 1. Those are standard CVI jacks and are not
designed to accept progressive scan (480P). See pages 6 and 7 in the TV's Directions for
Use manual for more information.
Front Speaker (Right) Center Speaker Front Speaker (Left)
4
Back of Player/
Receiver
P-SCAN
FR SR
VIDEO + +
ON S-VIDEO
OUT OUT
DIGITAL OUT
- -
4
SPEAKER
CLASS 1
OPTICAL COAXIAL
LASER PRODUCT
Speaker Terminals
2
Rear Speaker Rear Speaker
(Surround Right) (Surround Left)
6
3135 035 21551
P
ROJECTION
60PP9502)
P
LACEMENT OF THE
• Place the player/receiver on a flat, hard, and stable surface.
•
Leave sufficient room in front of the player/receiver for the
drawer to open.
•
In a cabinet, allow about 4 inches (10 cm) of free space around
the player/receiver. The player/receiver needs adequate ventila-
tion (air flow) to remain cool.
• Do not keep the player/receiver in a cabinet in an enclosed
environment when the unit is ON. High-power electronics gen-
FM Indoor Antenna
erate heat that may shorten the life of the equipment.
(short white wire)
Front
Speaker
(Left)
2X distance between front speakers
Connecting the
Speaker Wires
Rear Speaker
Speaker Terminals
(Left Surround)
.0 4
(1 2 7 "
m m
)
3a
a
P U
S H
IN
A
RRANGING THE
PUSH
DOWN F or best sound, the rear speakers should be located twice the distance
between the front speakers, measuring left and right from the center of
b
the front speakers.
1
Mount or place the Front Left and Right speakers at equal dis-
tances from the TV. Turn the speakers to an approximate 45-degree
angle from the listening position.
RELEASE
c
2
Mount the Center speaker or place it above (on a stand) or below
the TV to localize the center channel sound.
3
The rear speakers should be located at listening distance or just
behind the listening position. Mount or place the speakers at normal
listening height, facing each other either above or aiming toward
the listening position.
NOTE: Do not point the front and rear speakers toward each other.
This will create a sound conflict.
4
Place the Subwoofer anywhere away from the TV to avoid discol-
oring of the TV screen (magnetic interference). Since bass frequen-
cy is nondirectional, the subwoofer can be located anywhere except
next to the TV.
P /R
LAYER ECEIVER
Center Speaker
Home Cinema
Player/
Front
Receiver
Speaker
(Right)
VIEWING AREA
Rear Speaker
(Right Surround)
S B S
PEAKERS FOR EST OUND